Building the Best Ultrasonic Cleaning Equipment for Over Forty Years
Quick Contact Request a Quote


Quick Jump:

Mid Size Belt Conveyor Spray Washer

With belt sizes from 18″ to 24″ wide these heavy duty belt conveyor spray washers use an environmentally safe aqueous solution to remove oils and chips. Standard machines are offered with cycles for wash, rinse, blow off or dry. Additional cycles available for inhibiting, phosphate and seal. High powered pumps spray clean the parts inside and out and powerful blow off systems remove excess water. Drying systems are available to provide 100% dry parts. 

How It Works

All cleaning and rinsing solutions are recirculated and filtered through chip strainer baskets to insure a long bath life. Micron filtration and oil removal systems including coalescing oil separators are standard options. Pumps are heavy duty industrial, vertical in tank mounted, seal-less type for maintenance free operation.

Features of Inline Belt Spray Washers

  • 304 Stainless Steel wetted surfaces for longest life and lowest maintenance
  • High powered Blow Off Systems
  • Energy efficient recirculating hot air convection dryer saves 60% of the energy consumed by hot air blow offs.
  • Leak-proof side enclosure doors and a completely removable top of belt enclosure simplify routine maintenance and troubleshooting, providing total system access.
  • Maintenance free in tank mounted seal-less pumps
16" to 24"
Tank Material:304 stainless steel
Wash Tank Volume:48" dot tank 240 gallons OR
72" dot tank 350 gallons
Rinse Tank Volume:48" dot tank 240 gallons
72" dot tank 350 gallons
Wash Pump:60 to 160 gpm *
15 to 40 psig *
Rinse Pump:60 - 160 gpm *
15 to 40 psig *
Wash Tank Heat:140° f electric with temp. control
Rinse Tank Heat:140° F. electric with temp. control
Regenerative Blow Off:24" to 72"dot available top and bottom
Overall Width:60"
*depending on part size for energy savings
  • In Line Filtration
  • Chip Baskets
  • Higher Temperatures
  • Dual Lane
  • Spot Free Drying
  • Oil Coalescor
  • Progammable Controllers
  • Exhaust Duct and Fan
  • Variable Conveyor Speed
  • Closed Loop and Wastewater, minimization systems available including UF, RO and evaporation technology
Quick Contact > Request a Quote >