Lean Clean Rotary Basket Washers

 

 

The LeanClean 360 series of rotary basket industrial parts washers combines immersion and spray cleaning with available high tech ultrasonics to meet industrial parts washing requirements as well as critical cleaning and precision cleaning specifications. This ergonomic front loading parts washer cleans parts in baskets or fixtures by rotating, spraying, and spraying under immersion.

The cleaning cycle is followed by a combination of spray and immersion rinsing with available ultrasonic rinse, fresh water, and/or DI water rinse. Parts are completely dried in minimal time with Jenfab’s unique energy efficient dryer design.

How It Works

Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycles the solutions are delivered, filtered, and recirculated into the cleaning chamber on a continual basis. The baskets rotate in the solution as powerful underwater jets purge the parts with fresh filtered solution which flushes away all soils and chips continually. Fresh filtered solution purges the cleaning chamber more than twice a minute to ensure that even the most complex parts with blind holes are thoroughly cleaned.

Contact us today to schedule an appointment with one of our approved distributors who will assist with your cleaning needs.  

MODELS

Specifications

Floor Space: 3′ W x 5’6″ D x 7’6″ H
Load Height: 42″
Tank Volume: 75 Gallons Each Wash, Rinse
Pumps Stainless Steel: 60 GPM @ 40 PSIG
Dryer Blower: 1600 CFM Recirculating
Dryer Heat: 10KW 140° to 220°
Sound Level: < 75 DBA
Controls: PLC Controlled with 3 part cycle programs and HMI/OIT with Diagnostic, 24 volt control system
Basket Size:12 x 18 x 6 OR Stainless Steel 12 x 20 x 6
Cycles per Hour: 6 to 10 Wash/Rinse/Dry
Stainless Steel Tanks, Cleaning Chamber, Pumps
Polished Stainless Steel Housing
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets

Available Options

  • Ultrasonics (25 kHz, 40 kHz, 80 kHz)
  • Multiple frequencies can be combined for cleaning sub-micron size particles
  • Oil removal systems
  • Final fresh or DI water rinse header
  • Automatic rust inhibitor
  • Custom sizes available for larger loads
  • Rocking feature for delicate parts
  • Pump out station
  • Modem connection

Specifications

Floor Space: 6’W x 7′ D x 7’6″ H
Load Height: 42″ load capacity 300 lbs.
Tank Volume: 200 gallons each Wash, Rinse
Pump Volume: 120 GPM @ 40 PSIG
Dryer Blower: 3000 CFM Recirculating
Tank Heat Wash and Rinse: 15KW up to 160° F
Dryer Heat: 20 KW up to 190° F
Sound Level: <78 DBA
Controls: PLC Controlled with OIT / HMI, Diagnosis and Modem
Basket Size: Up to two 12 x 22 x 8″ OR |one 26 x 22 x 8″
Basket Size for 360-2 XL Model: 26″ W x 22″ D x 18″ H
Production Cycles per Hour: Up to 20 stainless baskets over 22 cubic ft./hour
Stainless Steel Tanks, Chamber
Filter Large #2 Bag with quick change swing top head
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets

 

Available Options

  • Ultrasonics 2000 Watts Advanced Tubular Design (25 kHz, 40 kHz, 80 kHz)
  • Higher operating temperatures for solution and dryer heat
  • Oil separation systems
  • Final fresh or DI water rinse cycle
  • Rocking feature for delicate parts
  • Larger work envelope up to 26″ W x 18″ H x 22″ D
  • Automatic loading and uploading

 

Image Gallery

 

Specifications

Specifications: 4 Basket
Floor Space: 8′ -2″ W x 9′ D 74 sq ft
Load Height: 42″
Tank Volume: 300 Gallons Wash & Rinse
Temperature:
160°
Pump Volume:
180 GPM @ 40 PSIG
Dryer Blower:
6000 CFM Recirculating
Dryer Heat:
40KW designed to dry at low temperatures
Sound Level:
< 79 DBA
Controls:
PLC Controlled with OIT / HMI and including Modem
Basket Size:
JENFAB Stainless 12 x 20 x 8″, Kaydon/Edge 12 x 18 x 6″
Based on 6 Cycles per Hour:
24 JENFAB Baskets produce 24 cubic feet/hr
Specifications: 8 Basket
Floor Space: 8′-6″Wx9′-6″D 81 sq ft
Load Height: 42″
Tank Volume: 300 Gallons Wash & Rinse
Temperature: 160°
Pump Volume: Wash 250GPM @50PSIG, Rinse 180GPM @50PSIG
Dryer Blower: 7600 CFM Recirculating
Dryer Heat: 60KW designed to dry at low temperatures
Sound Level: < 80 DBA
What Goes Here? PLC Controlled with OIT / HMI and including Modem
Basket Size: JENFAB Stainless 12 x 20 x 8″, Kaydon/Edge 12 x 18 x 6
Based on 6 Cycles per Hour: 24 JENFAB Baskets produce 24 cubic feet/hr
Stainless Steel Tanks, Chamber, Dryer
Optional Stainless Steel Housing available
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets

 

Available Options

  • Ultrasonics (25 kHz, 40 kHz, 80 kHz)
  • Multiple frequencies can be combined for cleaning sub-micron size particles
  • Oil skimmer
  • Coalescing oil separator
  • Final fresh or DI water rinse header
  • Custom sizes available for larger loads
  • Rocking feature for delicate parts

Image Gallery

 

Specifications

Floor Space: 10′-4″W x 8’6″D 87.5 sq. ft.
Load Height: 42″
Tank Volume: 360 Gallon Wash & Rinse Temperature: 160°
Pump Volume: Wash 250GPM @ 45PSIG
Pump Volume: Rinse 180GPM @ 45PSIG
Dryer Blower: 8000 CMF Recirculating
Dryer Heat: 60KW designed to dry at low temperatures
Sound Level: <80 DBA
Controls: PLC Controlled with color OIT / HMI and a Modem
Basket Size: Jenfab Stainless 12 x 20 x 8″
Basket Size: Kaydon/Edge 12 x 18 x 6″
Based on 6 Cycles per Hour: 48 Jenfab Baskets process 48 cubic feet/hr
Stainless Steel Tanks, Chamber, Dryer
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets

 

 

Available Options

  • Ultrasonics (25 kHz, 40 kHz, 80 kHz)
  • Multiple frequencies can be combined for cleaning sub-micron size particles
  • Oil skimmer
  • Coalescing oil separator
  • Final fresh or DI water rinse header
  • Custom sizes available for larger loads
  • Rocking feature for delicate parts
  • Third tank for additional rinse, RP or DI

 

Image Gallery

 

Specifications

Floor Space: 10′-4″W x 8’6″D 87.5 sq. ft.
Load Height: 42″
Tank Volume: 360 Gallon Wash & Rinse Temperature: 160°
Pump Volume: Wash 250GPM @ 45PSIG
Pump Volume: Rinse 180GPM @ 45PSIG
Dryer Blower: 8000 CMF Recirculating
Dryer Heat: 60KW designed to dry at low temperatures
Sound Level: <80 DBA
Controls: PLC Controlled with color OIT / HMI and a Modem
Basket Size: Jenfab Stainless 12 x 20 x 8″
Basket Size: Kaydon/Edge 12 x 18 x 6″
Based on 6 Cycles per Hour: 48 Jenfab Baskets process 48 cubic feet/hr
Stainless Steel Tanks, Chamber, Dryer
Chip Collection Baskets (Easy Lift Out)
Fork Lift Pockets

Available Options

  • Ultrasonics (25 kHz, 40 kHz, 80 kHz)
  • Multiple frequencies can be combined for cleaning sub-micron size particles
  • Oil skimmer
  • Coalescing oil separator
  • Final fresh or DI water rinse header
  • Custom sizes available for larger loads
  • Rocking feature for delicate pars
  • Third tank for additional rinse, RP, or DI

 

Image Gallery

 

REQUEST A QUOTE